有声,风凌天下,辰东完美世界有声小说

BYD battery electric forklift charging process picture- Hydraulic system In terms of hydraulic synchronization, in order to avoid uneven loading of goods, uneven force on the four cylinders, and asynchronous movements, a gear-type hydraulic synchronous motor (also known as a split-flow motor) is designed at the center of the four cylinders

Driving and driving are not suitable for simultaneous development

The neutralization position of the carbon brush has been adjusted on the test bench of the factory, and customers are not allowed to disassemble and adjust it at will

When adding water, it must not exceed the bottom of the distilled water bottle!!! 4

Easy maintenance: The easier it is to operate and maintain, the less worry and more assured customers will feel

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same

Don’t easily believe a salesperson’s opinion It is worth mentioning that in November 2019, Zhuoyi Forklift broke through foreign technology blockades and parts controls, and launched China's first "VDA three-way stacking forklift" equipped with an electric three-way forkhead for narrow channel dense storage scenarios, China's first 3-ton "RSEW multi-directional reach forklift" and "RRE double-reach reach forklift", which attracted the attention of the industry When moving, the fork brings the goods back so that the center of gravity of the goods is within the support surface It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data

They are all widely used in various industries

Advantages: 1

Fault 2: Sliding down when loaded When an electric transport truck slides down while loading, it is usually due to oil leakage in the oil pipeline or oil joints

The system has different power modes, which can make the vehicle flexibly give full play to its characteristics under various loads, improve the efficiency of energy utilization, and be more environmentally friendly and energy-saving

BYD battery electric forklift charging process picture- 4

So before purchasing a forklift, we need to understand what we are going to use the forklift for

Mainly: 1

Clean the gear box and change the gear oil Nameplate of electric pallet truck The nameplate contains the vehicle model, rated lifting capacity, maximum lifting height, deadweight, and factory serial number The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

Therefore, it requires the joint attention of the entire forklift manufacturing companies, sales companies, leasing companies, maintenance companies, and spare parts facilities companies

The body design of the electric transport truck is suitable for the workplace and has a good service life

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

When the gear is adjusted to the tortoise speed, the speed of the battery truck will be limited, and it will not be too fast when accelerating

First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large (9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

BYD battery electric forklift charging process picture- Because the vehicle's walking and steering adjustment adopts electric 360-degree steering, it has the characteristics of energy-saving, high efficiency, stable product operation, easy to use, reliable, low noise, and zero pollution BYD forklift solutions for food-grade logistics and handling operations: In the field of logistics, food, medicine, and technology have relatively high requirements for logistics equipment and operations

Precautions after using electric forklift in warehouse: 1

Tilt the joystick to tilt the mast so that it is in a vertical position

with ZF (China) Investment Co

When opening the process holes of the chemical pretreatment workpiece, pay attention to prevent liquid accumulation

Compared with internal combustion forklifts, the advantages of low noise and no exhaust emissions of electric forklifts have been recognized by the majority of users 2

Fast charging speed, it can be charged in 1-3 hours, which can save time for enterprises

Hazardous characteristics

When charging, unplug the power socket and connect the charger plug to the movable socket with a handle

Counterbalanced forklift operators should try to avoid sudden stops and turns

Violators will be severely punished

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info