斗破苍穹续集,兽性总裁的爱奴,耳根

BYD Forward Battery Forklift Maintenance Manual - The following subdivided industry applications are to understand the technical advantages of BYD new energy forklifts The technical threshold is relatively low and the unit price is also relatively low Usually, the front overhang of an electric hydraulic forklift, the length of the forklift fork/pallet and the safety distance are all fixed values Slow down before starting, slow down for a few seconds and then speed up; 5 6 It is not allowed to stand on the fork or pallet to work

Taking the lifting device as the research object, as shown in Figure 3-(a), it mainly includes a front lifting gantry 1, a rear lifting gantry 2 and a two-way telescopic fork 3

Reversing 1

We see on TV that there is a kind of transport vehicle in many warehouses

However, the electric hydraulic transporter must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

The electric walk-behind warehouse truck is the third type of forklift (III) in the classification of the World Industrial Truck Statistics Association

If the battery is damaged or the plate is irreversibly sulfated, it is recommended to return it to the factory for repair to avoid improper repair and safety hazards

It is not the case that cheap ones are good and expensive ones are profiteering; nor is it the case that cheap ones are of poor quality and expensive ones are perfect

Relevant data show that after years of technological accumulation and continuous R&D investment, domestic brands have gradually aligned their product line integrity and technical quality management with international industry standards, and are cost-effective

The first reason is the poor quality of the plate

BYD Forward Battery Forklift Maintenance Manual - They are widely used in the warehousing industry because of their compact body, flexible movement, light weight and good environmental performance

Forklift drive

If an internal leakage occurs, we need to inspect and replace the leaking part

The technological progress of computer-integrated manufacturing systems and the widespread use of automated warehouses have enabled AGV to develop rapidly Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads The advantages of zero emissions, long battery life, fast hydrogen refueling, and low noise have attracted the attention of forklift manufacturers This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation This can save costs, make efficient use of the electric transport truck, and maximize the cost-effectiveness Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

Warehouse forklifts are mainly designed for handling goods in warehouses

At the same time, it can meet the production needs of various electric forklifts and non-standard forklifts

Of course, practice makes perfect, but it also takes time

BYD Forward Battery Forklift Maintenance Manual - Electric trucks save time, effort, energy, cost and efficient operation

Large capacity battery, long working time

In fact, most of the reasons here are man-made

The system has different power modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more energy-saving and environmentally friendly

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

The timer and power meter are standard to remind the operator to charge at the right time

The push rod under the fork can be electrically adjusted to control the lowering height of the fork

Chain components 1

At the same time, the unmanned forklift control system can also seamlessly connect with job scheduling, process management and other tasks, helping companies to quickly manage logistics warehousing and create a low-cost, fully intelligent and efficient smart logistics warehousing

The most basic question in the inquiry about electric transport trucks should be about the operation of electric transport trucks

Forklifts are special equipment used in industrial and logistics warehouses

China, as the world's most populous country, has a very low per capita cold storage area, and there is still huge potential for cold storage development (at a rate of more than 35%)

2 Safety testing plan The system safety inspection of intelligent three-dimensional storage is a prerequisite for the normal operation of the project and is also a key design object

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info