小说阅读器,女人书籍排行榜,欢乐颂第二季

BYD New Energy Warehousing Forklift Manufacturer-

Because the vehicle's walking and steering adjustment adopts electric 360-degree steering, it has the characteristics of energy-saving, high efficiency, stable product operation, easy to use, reliable, low noise, and zero pollution

In a single set of gantry, the two lifting cylinders are connected through the inner gantry to achieve mechanical synchronization

The temperature difference between the inside and outside of the cold storage will cause the vehicle body to "sweat" and produce condensed water, which will cause the structural parts to rust and damage easily

The editor of New Energy Forklift will share it with you below: What are the operating procedures for electric forklifts? 1 Forklifts are generally equipped with pneumatic tires as standard, but they are prone to blowouts and are not wear-resistant, increasing maintenance costs Their performance and reliability need to match the freezing and refrigeration technology

He believes that, except for a few companies, the overall technical level of domestic lithium-ion forklifts is not high

The lifting device also relies on the motor to drive the hydraulic pump to push the hydraulic oil in the hydraulic cylinder to achieve lifting and lowering

Is only horizontal transportation required, or is there stacking, picking, or sorting? Are the items being transported special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the length of the forks, and the number of mast levels

High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

Ambient temperature: -20℃～+40℃ 4

BYD New Energy Warehousing Forklift Manufacturer- Electric truck manufacturers recommend that we have many specifications of electric pallet trucks, each with its own characteristics, and choose carefully

At the same time, users are encouraged to install safety monitoring devices on forklifts in use in accordance with the requirements of the new version of the regulations to improve safety

The operation is simple and easy to use The second reason is that the charging and discharging current is too large, and the plate is twisted and deformed

Then some people ask, why do we still use electric pallet trucks when there are electric forklifts? In fact, this is just like what we usually use

Unmanned forklifts are more efficient, more stable, more accurate and safer than forklifts

The following subdivided industry application scenarios will help you understand the technical advantages of BYD's new energy forklifts

Standardized management and land conservation are the basic principles of our warehouse operations

The main technical parameters include: rated lifting capacity, load center distance, maximum lifting height, mast inclination, maximum travel speed, minimum turning radius, minimum ground clearance, wheelbase, track width, etc

At the same time, it can meet the production needs of various electric forklifts and non-standard forklifts

The most prominent advantage is that lithium batteries do not need to be watered, and under normal use, they do not need maintenance 6

The AC drive motor provides stronger power and continues to run under full load

" In the early 1920s, electric reach trucks were introduced, followed by forklifts with gasoline engines and lifting devices

BYD New Energy Warehousing Forklift Manufacturer-

The following is shared by the new energy forklift editor: What kind of faults usually occur when electric forklifts are in use? 1

According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations

Semi-electric stacking forklift refers to a wheeled transport vehicle that loads, unloads, stacks, and transports palletized goods over short distances

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts At this time, the plate will appear rotten, and the active material will form blocks and accumulate between the two separators, resulting in a decrease in the capacity of the battery

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle 2

Relatively speaking, battery forklifts are much less powerful than diesel forklifts

When driving at an intersection, you must slow down, honk the horn, and confirm the KY; 3 Keywords: side stacking, unmanned forklift, hydraulic synchronization 1 If the electric stacker is exposed, it is easy to corrode and water ingress, so dust covers are added to these unknowns

The fork deflection detection error shall not be higher than the maximum design deflection of the fork

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info