天蚕土豆,玄幻小说改编的电视剧,玄幻小说排行榜

BYD ECB20S New energy forklifts Is it good Forklift license examination requirements: At least 18 years old, in good health, meet the special requirements of the job applied for, have an educational level suitable for the job applied for, have work experience suitable for the job applied for, have corresponding safety and technical knowledge and skills, and meet other requirements specified in safety and technical specifications

It uses a DC-driven generator, which has greater traction

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

Anti-slip requirements for cold storage environment The humidity in the cold storage is relatively high, the ground is slippery, and there may even be ice, which can cause the forklift to slip during braking

There are two installation methods for the travel motor: vertical and horizontal motors

Manual forklift

Hyster has added a new stand-on electric pallet truck, the S2 If it is lower than the limited working voltage, the forklift should stop running immediately

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

The electric walk-behind warehouse truck is the third type of forklift (III) in the classification of the World Industrial Truck Statistics Association

The speed of BYD forklifts can be set to 10KM/H, and the functions of turning speed reduction and high-speed limit are equipped to further ensure the safety of goods and personnel; the humanized design makes the driver more comfortable to drive

Steering problems of electric pallet trucks: 1

If the water level is lower than the standard level, distilled water should be added appropriately It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data

BYD ECB20S New energy forklifts Is it good

The cost of using explosion-proof electric transport vehicles is more than 20% less than that of pure manual transportation

Since the unmanned forklift is very flexible, it can make full use of the existing space and site for transportation work when there are no obstacles on the ground

At the same time, the product replacement cycle has been significantly shortened

For example, the oil disc valve cover is not easy to compact due to the large contact area, which may cause oil leakage It has the characteristics of saving labor and time, running smoothly and reliably, low noise and no pollution

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

(6) Unless under special circumstances, sudden braking is prohibited while the vehicle is carrying cargo

2M, 1

Battery capacity: 80V/700Ah 5

Moreover, unlike manual trucks and semi-electric trucks, it is equipped with a standing board, which allows you to stand and drive without using manpower

Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods

BYD ECB20S New energy forklifts Is it good What are the precautions for using a reach electric forklift? An electric forklift is a forklift that uses electricity to operate, and most of them use batteries to work Key design parameters The key design parameters of unmanned forklifts mainly include: maximum cargo weight, maximum cargo size, load center distance, minimum stacking channel width, maximum lifting height, maximum deflection of the fork end, maximum travel speed, and maximum lifting speed with full load 5

If there is no damage, but it just needs maintenance, we can do it ourselves

The lifting device also relies on the motor to drive the hydraulic pump to push the hydraulic oil in the hydraulic cylinder to achieve lifting and lowering

It is widely used in petroleum, chemical, coal, metallurgy, transportation, shipbuilding and other industries

Full load operation is not allowed Be in good health and meet the special physical requirements of the forklift operation you are applying for; 3

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

Compared with internal combustion forklifts, the advantages of low noise and no exhaust emissions of electric forklifts have been recognized by the majority of users

, which mainly engages in the research and development, manufacturing, sales, technical services and consulting of various electric vehicle motors; and jointly established ZF Heli Transmission Technology (Hefei) Co

The Spring Festival is coming soon, and the working intensity and workload of electric forklifts have greatly increased

Compared with manual trucks, the biggest advantage of electric walk-behind warehouse trucks is that they can help customers reduce the labor costs of enterprises and improve operating efficiency (1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

Low voltage protection function protects the battery and extends its service life

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info