大主宰天蚕土豆小说,古风小说,盗墓笔记txt全集下载

BYD ECB50 Warehouse forklifts Manufacturer

011

This section proposes solutions from the two aspects of mechanical structure and hydraulic system

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed

After testing, when the whole machine is at 1

The power manager can regularly monitor the battery status

Check whether the connection of the motor unit outlet (or terminal) is correct and reliable

The indoor use of the vehicle is very important

Electric pallet truck manufacturers can tell companies with certainty that electric pallet trucks, as a popular device at present, are very safe

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

The forklift mast cannot rise Most of the problems with the forklift's mast lifting are caused by oil leakage

It is an indispensable component in power and energy storage batteries

This product breaks through the concept of traditional battery forklifts, combines the advantages of internal combustion forklifts and electric forklifts, has a low center of gravity, compact structure, comfortable driving, green and environmentally friendly, can be flexibly operated in a small space, and its main performance indicators have reached the international advanced level

BYD ECB50 Warehouse forklifts Manufacturer

The carbon brush should be replaced according to the damage of the carbon brush

It can be said that if you understand the parameter table of one electric forklift, you can understand all types of electric forklifts based on the data

The safety distance is generally 200mm

Use the DC voltage range of the multimeter to measure the voltage across the battery

Lifting control Turn on the key switch and operate the handle in the indicated direction to raise or lower the fork 10 7 Plastic pallets can be divided into double-sided pallets and single-sided pallets

(5) Readjustment of air gap: The rated air gap Z will increase due to wear

, Ltd

The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3 In November 2018, Hangcha Group released a new product, the XC series new energy electric forklift, developed in cooperation with Contemporary Amperex Technology Co

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

BYD ECB50 Warehouse forklifts Manufacturer

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

The overall design of the equipment conforms to ergonomics

The lifting, lowering and turning of the forklift are driven by the hydraulic system

The system has different power modes, which can make the vehicle flexibly give full play to its characteristics under various loads, improve the efficiency of energy utilization, and be more environmentally friendly and energy-saving

Move the joystick to adjust the height of the forks so that the forks are at the same height as the gap at the bottom of the cargo

At present, BYD forklifts have been widely used in industries such as food and beverage, papermaking, feed, automobiles and parts, home appliances and logistics, and are committed to improving logistics and handling efficiency, optimizing resource allocation, saving logistics and handling costs, and creating higher benefits for various industries

And the magnetic density is higher

Longer service life: The power module is made of imported high-quality lithium batteries, chargers and controllers, and is made of one-time injection molding technology

Wherever I went, I saw that most of the products produced by the manufacturers were similar

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

After the electric forklift starts, you need to drive the electric forklift to the front of the goods and enter the working position

Electric truck manufacturers tell you that this is not only for the safety of the driver, but also to maintain the battery of the electric pallet truck and prevent shortening the battery life

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info