大主宰,有声小说下载,yy玄幻小说排行榜完本

BYD crane charging process diagram- BYD forklift solutions for food-grade logistics and handling operations: In the field of logistics, food, medicine, and technology have relatively high requirements for logistics equipment and operations

Therefore, full attention should be paid

, Ltd

(10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

The chassis is welded by profiles, so that the whole vehicle can realize turning, spinning and side shifting functions

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

We see on TV that there is a kind of transport vehicle in many warehouses

It is not the case that cheap ones are good and expensive ones are profiteering; nor is it the case that cheap ones are of poor quality and expensive ones are perfect

Forklift products have a warranty of two years or 2,000 hours

After many R&D improvements, the durability, reliability and applicability of electric forklifts have been significantly improved, completely surpassing internal combustion forklifts

Power The forklift is powered by the battery to drive the traveling motor and lifting motor

Drive system: The drive system is one of the important components of the electric forklift

BYD crane charging process diagram-

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

Therefore, it is easy to make mistakes when you have to twist your neck to check the reversing road conditions

Whether it is lead-acid batteries or lithium batteries, electric transport truck manufacturers can provide them to everyone, and recommend the most suitable electric transport truck and batteries that match it according to the company's own needs

Use lithium battery design: Compared with traditional lead-acid batteries, BYD forklift iron batteries have several major technical advantages: low operating costs and a battery cycle of about 10 years, which are characteristics and advantages that traditional rechargeable batteries cannot match

The oil pump is excessively worn, causing internal leakage of the equipment, and needs to be replaced Energy saving and environmental protection, simple and convenient operation

Compared with internal combustion forklifts, electric forklifts have a weaker carrying capacity, but they are environmentally friendly, compact, and affordable, so they are widely used in the pharmaceutical, food and other industries

Before repair, calibrate the mast of the electric forklift to maintain its inherent straightness

Because it is pollution-free and has low noise, it is widely used in indoor operations and other working conditions with high environmental requirements, such as the pharmaceutical and food industries

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

From the current situation, the technical development direction of electric forklifts mainly includes the following aspects: (1) Lithium electrification Driven by multiple factors such as the acceleration of forklift electrification, the continuous decline in the price of power lithium batteries, and increasingly strict supervision of the lead-acid industry, the lithium electrification of forklifts has become an obvious trend in the development of the industry Consider the needs of the standard forklift first

BYD crane charging process diagram- You only need to find the right position to fix it High safety factor All mechanical material equipment must make progress in safety design, otherwise it will be difficult to develop in the long run

Therefore, pharmaceutical warehousing logistics has high safety performance requirements for handling equipment and high handling efficiency requirements

When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h Otherwise, it is very easy to cause safety accidents during subsequent use

Generally speaking, the cost of large manufacturers will be lower than that of small manufacturers, but due to the brand effect, the price of forklifts will be higher

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits 3 When turning, the electric pallet truck must not be allowed to make a sharp turn at high speed

Especially in ports, logistics and warehousing, pharmaceutical, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info