好看的课外书,完美世界,天域苍穹

BYD warehouse truck customization- When operating a reach truck, try to use less long-term and long-distance acceleration0-8

Electric forklift: 0

Therefore, in addition to basic driving skills, drivers must not only learn how to load and unload goods, but also learn how to use electric forklifts to accurately and quickly pick up and unload goods

(3) Ensure that the battery pack has sufficient power

The entire freight process can be completed by one person, which has replaced manual transport trucks to a certain extent

2 The safety performance is much higher and it can operate for a long time, which greatly saves on labor costs

It has low electrostatic induction power, strong anti-interference ability, and stable and reliable operation

The push rod under the fork can be electrically adjusted to control the lowering height of the fork

The technical director also put forward a similar view

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

Compared with the forklift with extended legs, the front wheels are larger and the outriggers are relatively high

BYD warehouse truck customization-

Core data of this article: Electric forklift production volume, electric forklift consumption volume, forklift market electrification rate An electric forklift is a forklift that uses batteries as the source of power to drive the travel motor and hydraulic system motor to achieve travel and loading and unloading operations

The product used in this solution is the 610X in the 600 series wheel drive planetary gearbox, which best meets customer needs and can be connected to high power density electric motors

The maximum lifting height [3] refers to the maximum vertical distance between the horizontal section of the fork or the upper surface of the lifting platform and the ground; the maximum deflection of the fork end refers to the maximum linear displacement of the fork end in the vertical direction when the fork is at rated load and maximum travel

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

Internal combustion forklift Internal combustion forklifts are divided into ordinary internal combustion forklifts, heavy-duty forklifts, container forklifts and side forklifts

Due to their wide range of uses, many manufacturers can customize them to meet the needs of different users

Standardized management and land conservation are the basic principles of our warehouse operations

Its significance is to tell buyers its ability to travel on raised ground or over foreign objects

They have the advantages of simple operation, flexible movement, light weight, energy saving and environmental protection, and superior performance The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time 3

To replace the drive wheel, first remove the motor wires, then remove the wheel fixing bolts and tap them out gently with a hammer

according to the instructions of the WCS (Warehouse Control System) warehouse control system

When the vehicle is going down a slope, do not disconnect the circuit of the drive motor, but lightly step on the brake pedal to put the vehicle into a braking state, using the kinetic energy of the vehicle going down to reduce the energy consumption of the battery

BYD warehouse truck customization-

In terms of design, care should be taken to avoid accumulation of water vapor or dust

Their electric steering system, acceleration control system, hydraulic control system and brake system are all controlled by electrical signals, which greatly improves work efficiency and reduces the labor intensity of operators

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

Warehouse staff have to operate and record at the same time, which may lead to negligence, errors and omissions, and even affect the subsequent work; Improve accuracy: Inaccurate inventory of cargo locations will cause difficulty in finding goods during picking, disrupt picking routes, and thus reduce picking efficiency and accuracy; Improve operational efficiency: If it is impossible to monitor the internal warehousing logistics in a timely manner, and there is a lack of analysis of product data and shipping order data, warehousing management will be difficult and operational efficiency cannot be guaranteed

During normal use, pay attention to the insulation of the battery

Clean the rotating bearings and add lubricating oil

Especially when operating in aquatic product cold storage, it will also be corroded by salt

The integrated truck design has higher strength

At the same time, the Forward-looking Industry Research Institute also provides solutions such as industrial big data, industrial research, industrial chain consulting, industrial maps, industrial planning, park planning, industrial investment promotion, IPO fundraising and feasibility study, IPO business and technology writing, and IPO working paper consulting

In the past few years, BYD Forklift has continued to make efforts and has been improving in parts selection, production process and key performance optimization, and manufacturing cost control

Direct handling costs can be reduced by more than 25% compared to manual handling

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info