欢乐颂第二季,盗墓笔记第二季,风凌天下

BYD electric reach forklift is easy to use and affordable- The body design of the electric transport truck is suitable for the workplace and has a good service life It will be much easier to drive after you become proficient Moreover, when the vehicle is carrying goods, the mast should be tilted backward

Moreover, unlike manual trucks and semi-electric trucks, it is equipped with a standing board, which allows you to stand and drive without using manpower

There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc The switch on the handle of the manipulator arm controls the movement and the steering of the manipulator arm controls the movement

For the electric transporter itself, its configuration, load, maximum lifting height, fork width, etc

There are four inspection windows at the commutator end of the railway train motor for regular inspection and maintenance of the motor commutator and replacement of brushes

They are industrial handling forklifts, which are generally used in factory workshops, ports, stations, and airports to load and unload goods

AC drive motor, without carbon brush, basically requires no maintenance, reducing maintenance costs

The minimum turning radius is crucial for calculating the width of the channel that the electric forklift can pass through

BYD electric reach forklift is easy to use and affordable-

Electric transport forklift manufacturers emphasize that the maintenance cost of electric forklifts is very important for the normal life cycle, otherwise the battery is not powerful and the progress of the work is affected

Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable

To choose which type of tool, you still need to base it on the actual situation

How to operate a BYD forklift? Operating a BYD forklift is a technical job that requires certain knowledge and skills

It is not allowed to drive while raising or lowering the fork; 2

Hydraulic pallet trucks reduce labor intensity and improve working conditions

Check whether all standard parts are tightened

The mast of the reach truck can move forward along the track inside the leg with the lifting device to facilitate forking the goods

Electric truck manufacturers recommend that we have many specifications of electric pallet trucks, each with its own characteristics, and choose carefully

This is an obstacle

The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits

Manual pallet trucks are mainly used to carry pallets or directly carry goods, and both walking and lifting require manpower 2

BYD electric reach forklift is easy to use and affordable-

The following is a brief analysis by BYD Forklift Editor: 1

Daily maintenance is also very simple, and one person can complete the entire process, which has replaced the manual pallet truck to a certain extent

Cars and other eight series of products

Continuous breakthroughs in key technologies For a long time, the core three-electric (electronic control, motor, battery) technology of electric forklifts has been an important factor that has troubled the development of electric forklifts in my country, especially the electronic control system, which is the core component of electric vehicles, has long been monopolized by foreign brands

3 Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads The normal height is about 3 meters, and the high height is more than 10 meters Forklift is a non-manpowered tool for transporting goods in warehouses The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12° It will be much easier to drive after mastering it Except for some companies, the overall technical strength of domestic lithium battery forklifts is not high at present There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

Operators of explosion-proof electric forklifts must be qualified to use the equipment, operate it in accordance with regulations, and avoid unnecessary dangers

When the electric truck is not running smoothly or making unusual noises, check whether there are any problems with the vehicle components

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info