旷世神医,长生界辰东小说,我欲封天txt下载

BYD workshop special forklift customization-

, Ltd

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

We can recall that when the carburetor was not carefully maintained, was there a situation where the tension spring gasket fell into the intake pipe? This will cause the piston to be scrapped

04Four

The rapid development of electronic control technology has made the operation of electric forklifts more and more comfortable, with a wider range of applications and more and more solutions to logistics

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

(5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure

All operating functions can be realized by simple buttons on the handle In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor 3 In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

(2) Turn the key switch to the on position

The regulations are also very high

The use of this equipment will not only reduce operating costs, but also protect the working environment to a certain extent, because this equipment has the characteristics of environmental protection and noise reduction

BYD workshop special forklift customization-

When the electric truck is not running smoothly or making unusual noises, check whether there are any problems with the vehicle components

When turning the buttons, pay attention and do not turn violently and accelerate quickly

The truck manufacturer tells you that the third reason is that the battery is not fixed firmly, and it is caused by vibration caused by dragging

If the battery is damaged or the plate is irreversibly sulfated, it is recommended to return it to the factory for repair to avoid improper repair and safety hazards

Due to the mature market development, manual trucks are economical, comfortable, and labor-saving

The above are some common terms on the parameter table of electric forklifts that are easy to confuse companies

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

At the same time, the Forward-looking Industry Research Institute also provides solutions such as industrial big data, industrial research, industrial chain consulting, industrial maps, industrial planning, park planning, industrial investment promotion, IPO fundraising and feasibility study, IPO business and technology writing, and IPO working paper consulting

(4) When a forklift approaches or removes objects, the vehicle speed should be slow and steady, and care should be taken not to crush objects, wooden mats, etc Models with fixed platforms are also available 2 Electric trucks save time, effort, energy, cost and efficient operation

BYD workshop special forklift customization- The engine problem of diesel forklifts, whether it is an imported engine or a domestic engine, is the core part of the forklift's performance, and there are many brands to choose from, which requires careful comparison and analysis; and diesel forklifts also need to consider whether the exhaust pipe blows to the ground or to the sky 2

("Anhui Heli"), a leading enterprise in China's industrial vehicle industry, acquired Ningbo Lida Logistics Equipment Co

To ensure that the brake has sufficient braking torque, the air gap must be readjusted before the air gap reaches the maximum air gap value

Check the sensitivity of each control system

Forklift is one of the commonly used transport vehicles nowadays

In the industrial vehicle industry, BYD has made the greatest contribution to the use of lithium batteries in forklifts

Moreover, it has no environmental pollution, is small in size, and is light in weight, making it the most widely used battery on the market

If any abnormal condition is found in the forklift, stop and check it immediately

The height of the guardrail can also be customized according to the different heights of the driver, so as to help customers improve driving comfort to the greatest extent

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

The cold chain logistics industry, including multi-low temperature warehousing and distribution, has ushered in a peak period of development 3

Easy to operate The easier it is to operate an electric transport truck, the more popular it is among customers and friends

Pay attention to driving speed because slippery areas can easily cause side sliding

国产视频首页-国产视频网-国产视频网站在线-国产视频亚洲-日韩欧美精品一区二区三区-日韩欧美区

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info